Hawkins Pro 324 – 12/24 volt 40 amp Battery Charger & Built injJump Starter

R8 603.15

The Hawkins Pro 324 is a powerful 12 & 24V transportable charger designed to Jump Start medium to heavy motor vehicles up to 300A cranking capacity.

The Hawkins Pro 324 is a powerful 12 & 24V transportable charger designed to Jump Start medium to heavy motor vehicles up to 300A cranking capacity. This charger is ideally suited for the motor workshop, service station, farm or fleet operation. The output is protected by a re-settable circuit breaker to guard against reverse polarity or too high a charging current. It has an overload re-settable breaker if the charge current exceeds the rated output of the charger. It is a manual taper charger and as such must be disconnected when the charge current falls close to zero. This jump starter / charger is not automatic and is therefore not recommended for unsupervised charging of sealed batteries.

The Pro 324 is developed for the professional fleet operator, farmer, panel beater, plant hire or service station owner. In engine starter mode the Pro 524 uses mains electricity to power start a vehicle immobilised by a flat battery. The START BY-PASS button used to power start the vehicle, will supply in excess of 500 Amps DC. 12V or 24V selection is made by connecting the charging cable to either the 12V stud or 24V stud on the rear of the unit.

The transformer is protected by an automatic reset thermal circuit breaker. A 6 position rotary switch allows incremental selection of the charge current.
The Pro 324 was designed in compliance with IEC 335-2-2 and has a two year limited warranty against defects in materials and workmanship.

Pro 324 is locally manufactured.

Conforms to SABS IEC 335-2-29

Input Voltage : 230Vac

Battery Voltage : 12Vdc / 24Vdc

Charge Current : 37Adc / 44Adc

Engine Start Capability : YES

Dimensions : 260/540/220mm Without Handle

Data Sheet

Additional Information

Weight 17.5 kg
Dimensions 260 x 220 x 840 mm

You may also like…